Aug 29
The circuit is based on low-cost AtTiny2313 ATMEL microcontroller. It is able to read 125KHz RFID tags. Every tag is read then decoded, and its code is transmitted as ascii chars on the serial output. If the RFID code read is the same that is recorded in the micro non-volatile memory, then a relay pulses for 1,5 seconds, acting as electronic lock. The code stored in non-volatile memory is taken from the FIRST tag that is read from the circuit after burning the micro. The downloadable zip file contains the schematic diagram, the printed circuit board layout (single face, PDF 1:1 format) and the object file to burn in the micro. you can download document RFID 125KHz
Incoming search terms for the article:
- atmega8 rfid
- ATMEGA RFID
- how to make a rfid lock and key circuit
- pic rfid 125 khz SCHEMATICS
- rfid 125KHz
- 125KHz AMP schematics
- rfid 125khz chip schematic
- rfid reader 125khz schematic
- rfid reader schematics
- generic 125KHz RFID reader
Related posts:
- RFID Technology Applications An RFID system consists basically of two compo- nents:...
- Build own PABX Circuit consists of following stages. 1. Microcontroller The heart...