Usb Sound card

Usb Sound card

Make a sound card is no more a complex issue. If you use great IC PCM2702 from BURR BROWN / Texas Instruments you can create a fully functional USB sound card. This sound card can be powered from USB port and has one stereo output. You don’t need to install any driver for Windows XP and Vista, because they are already inside. This is really plug and play.

PCM2702 needs only few additional parts to work. The schematic is not complex. Sound card can be powered directly from USB port (jumper W1) or from external power supply (jumper W3). PCM2702 needs two power supply 3.3V (3V-3.6V) and 5V (4.5V-5.5V). I used fixed output voltage LDO TPS76733Q for 3.3V (IO2) and adjustable output voltage LDO TPS76701Q for 5V (IO3). Both LDO are produced by TI, I used this because I had it in my drawer. Any similar LDO can be used. Output voltage of IO3 should be set to little bit lower than input voltage to allow LDO good stabilization, in my case output voltage is set to 4.8V. Output voltage can be set by adjustable resistor R33. In case of low power supply, IO3 can be shorted by jumper W3. LED D3 signalizes power on.

Download Complete Document  USB Soundcard PCM2702

Link

Related posts:

  1. Audium chip outputs 100 watts of audio from 1.5 volts Audium Semiconductor has launched an audio power amplifier IC which,...
  2. High Voltage Amplifiers Here is a high voltage wideband amplifier designed to provide...
  3. Metal Percussion generator synthesizer-controlled equivalent sound as produced tuneable VCOs which supply rectangular...
  4. dc power supply KIT This kit combines an LM317 with a thumbwheel potentiometer to...
  5. Simple USB Power Injector For External Hard Drives A portable USB hard drive is a great way to...